Announcement

Collapse
No announcement yet.

Help with Adding RGB output to a SNES2/SNESjr

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help with Adding RGB output to a SNES2/SNESjr

    I need some help deciphering gamesx's notes for this mod. I'm a bit confused by the capacitors, resistors and wires and would really appreciate a clear (and large) image of what I'm meant to be doing. I've got a US mini SNES if it makes any difference.

    http://www.gamesx.com/rgbadd/snes2rgb.htm

    Anyone done it before or able to point me towards a better guide? I had a brief look in the forums but couldn't find anything.

    Thanks in advance
    Dan

    Edit: Forgot to say, my knowledge of electonic terms and principals isn't very strong, so a circuit diagram isn't much use to me. However, I'm getting quite good at soldering and I've sucessfully completed loads of console mods based on guides at www.mmmonkey.co.uk
    Last edited by halfacandan; 15-04-2006, 19:31.

    #2
    It seems that I don't need the complex amp afterall, according to this page.

    Thanks
    Dan
    Last edited by halfacandan; 15-04-2006, 19:54.

    Comment


      #3
      Can the modders here confirm that the simple RGB mod in the link above is accurate and works? I'm looking to do this and want to clear a couple of things up..

      It looks to me as though the description doesn't match the image....
      In the image everything is connected to U7, but the description says the RGB is from U4.
      What resistor values did you use?
      Did you use a different mod?

      Thanks guys.

      Comment

      Working...
      X