Announcement

Collapse
No announcement yet.

Scart switch issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Scart switch issue

    I've got a scart switch that i've been using using with no issues on my OSSC, i've come to use it with my CRT and have found that it's not passing the required voltage through to tell the screen to go into RGB mode. The cables are fine cause i can use them ok with a different switch. It's a pain cause i'm stuck using composite with this switch as there's no manual way to force RGB mode on the CRT.

    Is there anything i can do to get around this?

    #2
    Is it a scart switch with a built in scart lead? If so, have you had a look at the inside of the scart plug to see if pin 16 is connected up okay?

    What model switch is it?

    Pete

    Comment


      #3
      Jamie is there a gain dial on your scart switch?

      Comment

      Working...
      X