Having more of a clearout and have some MiSTer CRT cables available - photos here.
VGA to BNC Cable, 1.4m with separate 3.5mm audio cable (I was going to use this on a mono CRT with RCA type audio input, so there's also a 3.5mm to mono RCA adapter included). Very much like this one, not sure of brand, but it works well, well built and feels decent. £13 inc UK post
Retro Gaming Cables VGA to Scart 1.8m cable, integrated audio using RCA connectors so there's a separate RCA to 3.5mm stereo adapter. £13 inc UK post
JVC 17" CRT 240p/480i TM-1750PN-S Monitor - £250 pickup.
Nice screen with subtle scanlines, mono speaker. Has the following inputs:
Input A - Composite
Input B - Composite or Svideo
RGB/Component
Comes with a Retro Gaming Cables Scart to BNC Adapter (I've utilised some of the existing screws on the back of the casing to attach 2 x plastic P clips to hold this cable in place, undo 2 screws to remove this if you prefer), comes with a necessary stereo to mono adapter for audio.
Also included are 4 x right angle BNC adapters, and a right angle RCA adapter for audio. The power lead is right angled too! When I first got this screen I was short of space so having the right angled adapters saved a bit of space behind the monitor.
4 x BNC to RCA adapters also included, I bought these just in case, but never used them, I only remember using the RGB input.
The screen is lovely - both image quality wise and condition - no marks, no burn in. The casing has a couple of marks/scratches on the edges - nothing distracting though when I was using it. See the photos.
Dimensions (H x W x D) - 330mm x 395mm x 406mm
I've used this with various PAL and NTSC consoles over the years - such as multiples of Master System, Mega Drive, Saturn, DC, SNES, SFC, N64 and MiSTer.
Printed out part of a service manual from a similar model, which explains how to get into the service menu to adjust Horizontal and Vertical positioning.
Photos
Random posts with someone sharing more info about the spec here and here.
Collection only from Bath, you're welcome to try your console out on it first or I can demo a MiSTer working on it. If you're local to Bath but don't drive or want to meet halfway somewhere then can possibly come to some sort of arrangement. I am not able to package this for courier, if you want to arrange collection and they can pack it then I'm up for that.
RGB Scart Shifter - photos here PENDING
Years ago I used this with a regular CRT to allow me to properly centre the image. Allows both Horizontal and Vertical adjustment. Comes with PSU and RGB Scart Cable. Plug your console into this, and plug this into your TV, when it's not powered it acts as a simple passthrough device and when you do switch it on then you can use the dials to adjust the image position (not size, just position). Examples of me trying it with a JVC BVM type CRT with a SFC and a MiSTer. £25 inc UK post.
Payment via Bank Transfer or Paypal (as long as I don't have to have fees).
Ta
Pete
VGA to BNC Cable, 1.4m with separate 3.5mm audio cable (I was going to use this on a mono CRT with RCA type audio input, so there's also a 3.5mm to mono RCA adapter included). Very much like this one, not sure of brand, but it works well, well built and feels decent. £13 inc UK post
Retro Gaming Cables VGA to Scart 1.8m cable, integrated audio using RCA connectors so there's a separate RCA to 3.5mm stereo adapter. £13 inc UK post
JVC 17" CRT 240p/480i TM-1750PN-S Monitor - £250 pickup.
Nice screen with subtle scanlines, mono speaker. Has the following inputs:
Input A - Composite
Input B - Composite or Svideo
RGB/Component
Comes with a Retro Gaming Cables Scart to BNC Adapter (I've utilised some of the existing screws on the back of the casing to attach 2 x plastic P clips to hold this cable in place, undo 2 screws to remove this if you prefer), comes with a necessary stereo to mono adapter for audio.
Also included are 4 x right angle BNC adapters, and a right angle RCA adapter for audio. The power lead is right angled too! When I first got this screen I was short of space so having the right angled adapters saved a bit of space behind the monitor.
4 x BNC to RCA adapters also included, I bought these just in case, but never used them, I only remember using the RGB input.
The screen is lovely - both image quality wise and condition - no marks, no burn in. The casing has a couple of marks/scratches on the edges - nothing distracting though when I was using it. See the photos.
Dimensions (H x W x D) - 330mm x 395mm x 406mm
I've used this with various PAL and NTSC consoles over the years - such as multiples of Master System, Mega Drive, Saturn, DC, SNES, SFC, N64 and MiSTer.
Printed out part of a service manual from a similar model, which explains how to get into the service menu to adjust Horizontal and Vertical positioning.
Photos
Random posts with someone sharing more info about the spec here and here.
Collection only from Bath, you're welcome to try your console out on it first or I can demo a MiSTer working on it. If you're local to Bath but don't drive or want to meet halfway somewhere then can possibly come to some sort of arrangement. I am not able to package this for courier, if you want to arrange collection and they can pack it then I'm up for that.
RGB Scart Shifter - photos here PENDING
Years ago I used this with a regular CRT to allow me to properly centre the image. Allows both Horizontal and Vertical adjustment. Comes with PSU and RGB Scart Cable. Plug your console into this, and plug this into your TV, when it's not powered it acts as a simple passthrough device and when you do switch it on then you can use the dials to adjust the image position (not size, just position). Examples of me trying it with a JVC BVM type CRT with a SFC and a MiSTer. £25 inc UK post.
Payment via Bank Transfer or Paypal (as long as I don't have to have fees).
Ta
Pete
Comment