Out of curiosity how are people powering their pce minis? as theres no official powerbrick for the euro region only jpn & usa got one. The manual says a 5v 2A adapter will work i have been currently using my iphone plug but that only kicking out 1A it seems to work ok but i'm worried that it might break if i use a low amp rating as it wont be able to pull enough power im guessing it needs those 2 amps if you have a fully decked out multitap plugged in. I have been reading around and found a few horror stories about power supplies that kill the usb sockets on the pce if you even go slightly over 5v even as little as 5.1 someone was using a raspberry pi power adapter and managed to kill their mini. Ended up getting this but it's total overkill but least i can plug in all my minis into it and as it has adaptive charging it should match what the machine needs (i hope).
I really don't want to risk frying my mini pce mini usb controller ports and have to send my pce back to japan it took long enough to get it here, still annoying konami didn't release a power brick for europe. Be careful out there people with your minis be very careful that whatever is powering it is kicking out exactly 5v.
I really don't want to risk frying my mini pce mini usb controller ports and have to send my pce back to japan it took long enough to get it here, still annoying konami didn't release a power brick for europe. Be careful out there people with your minis be very careful that whatever is powering it is kicking out exactly 5v.
Comment