PRODUCT INFO
The SX-1 is a FPGA based computer compatible 100% with the MSX2+ standard. It features VGA/RGB/Composite video output, stereo audio output, PS/2 keyboard input, 2 DB9 joystick ports, 2 USB ports, SD card slot and 2 cartridge slots.
The board has mini-ITX form factor thus it can be host on any modern PC case. Furthermore, the board includes internal pin headers for audio, USB and joystick making it very easy the use of a PC case front/rear panels.
Internally, the SX-1 also features SCC+ sound, FM sound, 2 or 4 MB RAM mapper, and turbo mode (5,37mhz/8,06mhz). The two cartridge slots allow the use of any MSX compatible cartridges. Also each slot can be configured as internal MegaSCC+.
You can connect any PS/2 keyboard (or USB keyboard if implement PS/2 protocol through USB) and MSX compatible joysticks (DB9). The unit also includes a SD slot that can be used as mass storage device through BASIC or MSXDOS command line.
In addition an optional external cartridge caddy/extension can be connected to have the cartridge slots outside the case. The caddy comes in a 3D printed case and includes ribbon cables and fixing screws.
Attention! It does not includes the case
TECH SPECS
-Altera Cyclone EP1C12Q240C8N FPGA
-32Mb SRAM
-2x standard MSX Cartridge Slot Connectors
-1x microSD Card Slot
-D-Sub 15 VGA/RGB video output w/scanlines generator.
-RCA composite video output
-3.5mm jack stereo audio output
-PS2 Keyboard port
-2 DB9 joysticks ports
-Extensible cartridge slots
-Compatible with KdL firmware
-Includes 3D printed backplate
The SX-1 is a FPGA based computer compatible 100% with the MSX2+ standard. It features VGA/RGB/Composite video output, stereo audio output, PS/2 keyboard input, 2 DB9 joystick ports, 2 USB ports, SD card slot and 2 cartridge slots.
The board has mini-ITX form factor thus it can be host on any modern PC case. Furthermore, the board includes internal pin headers for audio, USB and joystick making it very easy the use of a PC case front/rear panels.
Internally, the SX-1 also features SCC+ sound, FM sound, 2 or 4 MB RAM mapper, and turbo mode (5,37mhz/8,06mhz). The two cartridge slots allow the use of any MSX compatible cartridges. Also each slot can be configured as internal MegaSCC+.
You can connect any PS/2 keyboard (or USB keyboard if implement PS/2 protocol through USB) and MSX compatible joysticks (DB9). The unit also includes a SD slot that can be used as mass storage device through BASIC or MSXDOS command line.
In addition an optional external cartridge caddy/extension can be connected to have the cartridge slots outside the case. The caddy comes in a 3D printed case and includes ribbon cables and fixing screws.
Attention! It does not includes the case
TECH SPECS
-Altera Cyclone EP1C12Q240C8N FPGA
-32Mb SRAM
-2x standard MSX Cartridge Slot Connectors
-1x microSD Card Slot
-D-Sub 15 VGA/RGB video output w/scanlines generator.
-RCA composite video output
-3.5mm jack stereo audio output
-PS2 Keyboard port
-2 DB9 joysticks ports
-Extensible cartridge slots
-Compatible with KdL firmware
-Includes 3D printed backplate
Comment