I fully appreciate might not be the best place for this, have posted in avforums too, so thought I'd ask at least for the audio and videophiles among us.
I have an LG CX 48, NVIDIA Shield TV (2019) and a (recently received) Denon 2700h receiver. I run at Atmos setup with 3 fronts, 2 height speakers and 2 rears.
I've had the Shield running perfectly well on my CX, able to process HDR10 and Dolby Vision. I need the Shield HDMI'ed into my Denon to make use of DTS and DTS:X sound tracks used my Plex files, since the CX cannot pass through or process DTS tracks or lossless TrueHD.
Oddly, however despite the Shield recognising Dolby Vision on the CX when directly plugged in, it refuses to recognise Dolby Vision through the Denon AVR (which supports Atmos and Dolby Vision). I've tried various cables and no dice. The fact the same cables work on the LG CX surely means it's the AVR? I can't enable any kind of Dolby Vision option on the Shield TV, as it simply doesn't display - unlike when connected to the OLED.
I've messed around with the 4K/8k Signal Format option on the 2700h and no matter whether it's set to 'standard' or 'enhanced' I get the same issue. I've tried umpteen configurations and settings changes and still experience the same issues. Once again, appreciate this may not be the forum to ask, but wondered if anyone has a similar setup and issues?
I have an LG CX 48, NVIDIA Shield TV (2019) and a (recently received) Denon 2700h receiver. I run at Atmos setup with 3 fronts, 2 height speakers and 2 rears.
I've had the Shield running perfectly well on my CX, able to process HDR10 and Dolby Vision. I need the Shield HDMI'ed into my Denon to make use of DTS and DTS:X sound tracks used my Plex files, since the CX cannot pass through or process DTS tracks or lossless TrueHD.
Oddly, however despite the Shield recognising Dolby Vision on the CX when directly plugged in, it refuses to recognise Dolby Vision through the Denon AVR (which supports Atmos and Dolby Vision). I've tried various cables and no dice. The fact the same cables work on the LG CX surely means it's the AVR? I can't enable any kind of Dolby Vision option on the Shield TV, as it simply doesn't display - unlike when connected to the OLED.
I've messed around with the 4K/8k Signal Format option on the 2700h and no matter whether it's set to 'standard' or 'enhanced' I get the same issue. I've tried umpteen configurations and settings changes and still experience the same issues. Once again, appreciate this may not be the forum to ask, but wondered if anyone has a similar setup and issues?
Comment