The Nintendo Switch has become home to a staggering number of indie and 2D games, and it becoming the platform of choice for games that may not receive the attention they deserve on other platforms. All this is in spite of the fact that Nintendo neglected to include a traditional D-Pad on the Joy-Cons included in the base package. Nintendo were keen to allow each Joy-Con to function as separate controllers to facilitate 2 player gaming reminiscent of the Famicom in Japan. As a result, the D-Pad was replaced with an additional 4 face buttons and players are forced to fumble with either the analogue stick or using those 4 face buttons when playing 2D games - not ideal. To make things worse, Nintendo’s solution of selling an additional Pro Controller with the D-Pad included isn’t much help for anybody using their console in portable mode. In step Myriann who have done what Nintendont by offering a D-Pad solution for Joy-Cons. Is it worth dismantling your previous controllers to do this?
Let’s cut to the chase - this is an involved process. You will be required to open and fully tear down your Joy-Con in order to move everything over to the new D-Pad shell. On the plus side, there is no soldering involved so anybody with patience and a steady hand will be able to do this. Anybody interested should watch the numerous Joy-Con teardown videos on YouTube to decide if they’re up to the challenge. After doing all this, how does the D-Pad feel? The answer is, very good! This is a little surprising given that this is merely a replacement shell and thus still mechanically 4 separate buttons underneath, but the reality is that Nintendo, Sony and Microsoft D-Pads have always functioned in this way. There is a slightly ‘click’ as you press each of the 4 directions and feels different to the Pro Controller because of this, but overall still feels like a decent solution. The D-Pad has enough height to avoid feeling mushy like the PlayStation D-Pads often do, yet still has a low enough profile to not feel uncomfortable like the Xbox or Dreamcast D-Pads. It perhaps won’t satisfy those who lust for the roller-base D-Pads of the Mega Drive and Saturn, but ultimately still feels natural to use when playing Sonic Mania or Shovel Knight.
So what are the downsides? As mentioned, the installation process is not trivial, even people with experience dismantling controllers or even iPhones should familiarise themselves with the process before making a decision. There no soldering involved so it’s perfectly possible for anybody with patience, but the Joy-Cons are one of the most frustrating controllers to take apart. The main reason this review contains no pictures of the inside of the Joy-Cons is because after opening those things once, they are never going to be opened again. On the other hand, the left Joy-Con is the easier of the two to open so those who just want the D-Pad and aren’t interested in matching colour Joy-Cons could save themselves more than half of the hassle by leaving the right Joy-Con alone. After finishing replacing the left controller shell, we seriously considered doing this. However, the Super Famicom colour scheme shells pictured (albeit pure white rather than off-white) for both Joy-Cons proved too alluring. The process was absolutely worth that stress, but do be aware that Myriann do allow people to purchase just the left Joy-Con shell by itself for a reduced price. The second drawback to this is the fact that your left Joy-Con loses its face buttons making it less than ideal for multiplayer use. It’s still functional (albeit using the D-Pad directions rather than the individual fire buttons), but people who use their Joy-Cons for multiplayer often should bear this in mind.
Overall, this is an excellent solution with great build quality and the end result is a very pleasant-feeling D-Pad Joy-Con. All those 2D games on the eShop are given a new lease of life and can finally be played the way they’re supposed to be. The fact that we have to go to such lengths for basic functionality boggles the mind and hopefully Nintendo will release a Pro Joy-Con at some point. As it stands however, Myriann’s replacement D-Pad shells are a far better option than anybody expected and worth serious consideration for any retro gamer.
If you're still interested in doing this modification despite the difficulty, let’s take a brief look at the process. Firstly, make sure you have the correct size Y-shaped screwdriver - many guides on the internet claim that the same screwdriver used to open other Nintendo devices can be used. However, to this reviewer’s eyes the screws do seem to be slightly smaller so make sure you pick up a screwdriver intended for the Switch. When removing the rear shell, you are greeted by the battery and it’s compartment. Unscrewing this will allow you to access the main board itself, although the modular nature of the Joy-Con means you have to remove separate ribbon cables for the L button, - button and analogue stick. These ribbon cables will be familiar to anybody who has opened an iPhone, and it is notoriously easy to break the connector they are inserted into - take your time. Once this is done, you can remove the mainboard and start replacing the shell. Strangely, the ZL button is attached to the same plastic that houses the battery, and is extremely difficult to remove due to the 2 springs underneath as well as the ribbon cable being glued to the plastic. This reviewer opted not to do this and simply use the existing plastic, but it does mean that the original colour of the Joy-Con will be visible on the narrow strip between the L and ZL buttons. This is not a big deal if you have the grey Joy-Cons, but may be unacceptable if you have coloured Joy-Cons or intend to use a transparent shell where the different colour may be visible. The right Joy-Con is a similar process but actually more difficult due to the need to remove the IR sensor, additional antenna and NFC reader. The ribbon cable for the IR sensor is glued to the front shell requiring peeling to remove. Overall, the process is fiddly and time consuming, but doable by simply following video guides. People can save themselves 60% of the stress by leaving the right Joy-Con alone, however. After doing this, you will have a much improved set of Joy-Cons.
Announcement
Collapse
No announcement yet.
Myriann Switch D-Pad Joy-Con Shell Case Review
Collapse
- Created by: Jake Baldwin
- Published: 15-02-2018, 12:48
- 0 comments
-
X
Collapse
Categories
Collapse
article_tags
Collapse
- 3DS Reviews (25)
- Dreamcast Reviews (44)
- DS Reviews (29)
- Editorial (26)
- Gamecube Reviews (39)
- GBA Reviews (17)
- Hardware (12)
- Import and Tech (19)
- Interviews (3)
- Mobile / Tablet Reviews (11)
- news (15)
- pc reviews (22)
- PS1 Reviews (3)
- PS2 Reviews (43)
- PS3 Reviews (43)
- PS4 Reviews (9)
- PSP Reviews (21)
- PS Vita Reviews (12)
- Reports (20)
- Site docs (4)
- Switch Reviews (10)
- Wii Reviews (31)
- Xbox360 Reviews (99)
- XboxOne Reviews (10)
- Xbox Reviews (17)
Latest Articles
Collapse
-
Shoot'em'ups come in all sorts of graphical flavours: fantasy, sci-fi, steampunk, modern day, wartime, or even the sexy kind, like Cosmo Dreamer and Like Dreamer, together known as the Double-D Collection.
Or at least that's what the title and cover would make you think. Publisher Eastasiasoft created a suggestive aura around these games, probably to get more attention than they otherwise would have had, but you cannot judge a game from its cover: yes, there are a couple of gravity-defying...-
Channel: Current Gen
10-03-2024, 08:20 -
-
The Switch's hybrid nature and the number of shoot'em'ups available on it created some interesting peripherals like Fangamer's FlipGrip, a plastic cradle to hold Switch's main body vertical with the Joycons attached to the sides; the FlipGrip kept Switch portable but is not compatible with the console's Lite or OLED iterations, and there are no signs of an updated version being studied. Enter Todd Gill, 3D printer extraordinaire. Under the name Retro Frog he designs, prints, and sells (and more o...
-
Channel: Current Gen
15-10-2023, 07:48 -
-
by ArchivesHere is a translation of the menu screens in Boboboubo Boubobo Dassutsu! Hajike Royale for the Nintendo Gamecube:
Main Menu
Story Mode
"This is single player mode"
"You can have fun in Story mode"
Nose hair Training Centre
"4 player battle, But only up to 4 players can play!"
Secret Connection
"Here you can connect a GBA cable to the Gamecube"
Gallery "Here you can view Bobobo's files...-
Channel: Features
22-08-2023, 13:33 -
-
by ArchivesIn this image-obsessed industry, it's critical that a game projects a strong sense of identity. With an identity comes a target audience. Sony have arguably captured the 'twenty-something male' flag and, to consolidate this position, Sony Music Entertainment releases this: a game featuring nothing but scantily clad females. Oh, and some very nice scenery.
...-
Channel: Retro
21-08-2023, 12:13 -
-
by ArchivesFamily reunions tend to follow one of two distinct protocols: everyone meets up, reminisces and has a good old chat and a laugh; or everyone meets up, reminisces and remembers why it’s been so long since they last saw each other, the evening ending in a ferocious argument. Why is this relevant to this Devil May Cry 3 review?
The latest meeting of the divinely comedic twin siblings of Dante and Vergil falls rather violently into the second category. Something about their murdered mother’s amule...-
Channel: Retro
06-09-2022, 08:30 -
-
by ArchivesFear. It’s something that collective consciousness values as a desirable commodity, especially in the pop culture spin of everyday modern life - An element that mainstream entertainment likes to use in distilled form when it comes to getting a rise out of our adrenaline glands. Whether it be watching the latest slasher flick, experimenting with the next extreme sport or avidly reading the current best-selling horror fiction… On the whole, we take pleasure out of being scared. Read this Silent...
-
Channel: Retro
11-07-2022, 13:50 -