Announcement

Collapse
No announcement yet.

SCART in/out device needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    SCART in/out device needed

    Does anyone know if something is available that will solve my problem...
    I have all the consoles hooked up to scart switch boxes and then going into one RGB scart TV. I now have a second TV and want the scart Out to be able to switch between the two tv's.

    Devices that take many inputs and one output are all over the place and I have found a scart distributor that will output signal to two monitors at the same time (but it is ?40). I just want the reverse of the common scart switchbox (must be manual switching though).

    Anyone know where I can pick one up?

    #2
    or you could just use a regular argos scart switcher "backwards"

    Comment


      #3
      nah, a scart socket is wired differently depending on whether it is used as an input or an output. So unless it is fully wired (try unscrewing the part of the socket that holds the scart plug together and if all pins are connected to cables then it is), you'll have to find a scart distributer.

      Comment


        #4
        Yeah, just use another Argos scart switcher in reverse.

        The lead you normally plug into your TV goes into the OUTPUT of the new one and then you can run INPUT A to one TV and INPUT B to another.

        Just make sure the RGB button is switched on.

        Comment


          #5
          Originally posted by Hitcher
          Yeah, just use another Argos scart switcher in reverse.

          The lead you normally plug into your TV goes into the OUTPUT of the new one and then you can run INPUT A to one TV and INPUT B to another.

          Just make sure the RGB button is switched on.
          I knew it would be simple! Thanks folks. For some reason I just had a complete mental block with this one!

          Comment

          Working...
          X