How can I play Sega model2/3 arcade games on my home tv?

[ezg]

Probably not in the normal remit of the site and this section, but perhaps some kind person can point me in the right direction as I haven't got a clue where to start looking...

This is probably just a pipe dream but one that for me is worth investigating at least, so how exactly could I play Sega Model 2/Model 3 games on my home tv using the original arcade boards?

How easy is it to do?
What equipment would I need?
Where can I buy the boards from and how much would they cost?

Any help or links appreciated, thanks

[Madbury]

Hmm not sure you can tbh. They use a funny resolution, although the hardware may have a dip switch setting to knock it back to standard resolution.

If that is the case you will need a supergun and an RGB compliant TV (i.e. one that isn't ages old).

As for the boards I simply don't know, ebay?

[ExpertKing]

Unless your TV can display a medium resolution signal your out of luck.Alternative options are to get your hands on a Sony multisync monitor,Hantarex POLO monitor or a multu res plasma.I think last years Hitachi series handles all frequencies.

Other Items needed:-

Model 2/3 board (90% are 25kz-med res)
test rig/supergun (jamma would be more useful)
jamma adapter for Model 2/3 + 3.3v psu for sound amplfier.

Hope that helps.

[Madbury]

^^^

There you go that's way more helpful than my ramblings.

[ezg]

Cheers guys for the swift replies, looks like I shall have to an even more deeper search then.