This page has the guide which I followed: http://www.phosphors.com/gcn/region%20switch along with Saur's advice in an old thread on here.
At the time I didn't have any kynar wire (definately the best wire for this job), so I used the wire from a spare IDE cable, not the normal fat 40wire job - the 80wire ata100 cable, it was exactly like kynar.
Pete
At the time I didn't have any kynar wire (definately the best wire for this job), so I used the wire from a spare IDE cable, not the normal fat 40wire job - the 80wire ata100 cable, it was exactly like kynar.
Pete
Comment