PS2 Network Adaptor Help Please

[VR46]

I've set it up manually (no joy at all with the NTL default settings) seems fine but then when trying to connect, the test gets to the "2nd Ball" then I get the error message "DNS resolve failed, no response from Server (2)"

Both DNS address I've put in are correct and I've even tried putting DNS address 1 in twice, but still same error message, I'm probably missing something obvious, please save my Network Adaptor from going out of the window.

Thanks

[VR46]

decided to give this another go earlier, progressed a bit;

Using the Automatic NTL setup no problems, sets up OK, run the Diagnostics and again all OK but when trying to connect to Central Station I get as far as Authenticating DNAS Data, then after about 60 seconds;

"Central Station cannot be contacted, Please check your settings and try to connect again"

Is it just timing out or is there a problem ?

Ping info: min. 19.84 / max. 40.19 / avg. 24.36

Cheers

[disco-tom]

If you're still having problems and don't know why it may be the DNAS stopping you going online. Is your machine chipped? If so and the chip is on, then I reckon that's why you can't connect.

Here's a thread which explains it, I think.

http://ntsc-uk.domino.org/showthread.php?t=27838&highlight=PS2+Network+Adaptor%2A

Only reason I found this info is because I'm currently doing a search to see if a UK Network Adaptor will work fine on an unchipped US machine for US games.