Announcement

Collapse
No announcement yet.

UK -> US Xbox Xport!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    UK -> US Xbox Xport!

    Hi there all

    It's my first post here, and I've done my best searching the net here and elsewhere for answers to my questions (started a couple of hours ago!), but although there's loads of useful info, nothing really confirms what I'm after, so I was hoping somebody could help!

    Basically, I'm moving to the US in July, and I would like to be able to play my PAL xbox games over there. After much reading, I think that the best solution for me would be to get a modded xbox to play both PAL/NTSC games (as I was thinking about doing so anyway).

    I've been in contact with the guy at premodded.co.uk who has been helpful. He can sort out an xbox with xecutor 2, upgraded HDD, and a PSU switch from 110 to 240v, which should solve the power supply problem.

    So, my question is really regarding how to get the best possible picture on a US TV, using my modded PAL xbox. I understand that they have different inputs in the US, with component being the best, but will a modded xbox with the dashboard set to NTSC actually output an NTSC image? If so, would I be able to use the US Xbox High Definition Pack (http://www.xbox.com/system/high+defi...talog=cat%2dus), plugged straight into my modded UK xbox, to output to a decent US TV?

    In addition, will I be able to use my modded pal xbox to display other US display modes such as progressive scan/HDTV should I get the chance, or will this not be possible?

    In addition, if anyone could point me to a FAQ regarding switching an internal PSU mod from 110 to 240v, that would be greatly appreciated. It does seem straightforward, but I'd hate to blunder in and cause damage!

    And also, if anyone has any feedback on premodded.co.uk either via post or pm, that would be great, as I may be spending a hefty amount of cash with them!

    Also, any other tips about going over to the US would really be appreciated - if there's an easier solution it would be good to hear about it!!

    Cheers

    Mike

    Edit: Just got to page 5, looks like superstu has got prog scan working through a modded pal xbox, with the NTSC dash. If anyone could confirm though I'd be grateful.

    #2
    Mike,

    your xbox will output prog scan no problem once its switched to NTSC, I have read that it will output prog scan in "pal" mode but can't confirm this, it seems logical though as the componant output like RGB inst really pal or ntsc but colour and luminance, of course you'll need to correct leads. it'll be identical to a native US machine so HDTV resolutions will be possible.

    the power thingy should be fairly straight forward, I'm not sure if they need to replace the power supply or it can be modded but your xbox is just a bunch of pc parts really so I would worry about it.

    Comment


      #3
      dmg

      Thanks very much for the help - exactly what I needed for reassurance before splashing out on chips, HDD upgrades etc!

      Now all I need is to decide where to go - I'll PM Saurian as he seems to be the man to ask round here! If anyone does have any feedback on premodded.co.uk that would also be appreciated.

      Thanks again

      Mike

      Comment

      Working...
      X