http://www.bordersdown.net/showthrea...this-a-good-TV <-- thats the thread dude, if that helps
Announcement
Collapse
No announcement yet.
Sony Trinitron KV-14T1U
Collapse
X
-
I use one of these for my retro gaming and I've done something a bit daft. I had the TV in service mode today when there was a knock at the door. I returned to the TV only to find that my 6 year old daughter had picked up the controls and moved a few of the settings.
So I want to return it to the default settings but I can't find anything on the net so I was wondering if someone could go into the service mode on their TV and let me know what the settings are.
To enter the service mode, put the TV into stand by mode by pressing the green button on the remote. Pressing the [i+] button (last on the number pad), pressing the 5 button, the + button for volume, and then the teletext button. Then it will show the "TT", and once that happens pressing the menu button should bring up the menu.
Cheers
Comment
-
Can anyone tell me which remotes will work with this telly?
Trying to find one on eBay: http://www.ebay.co.uk/sch/i.html?_nk...at=0&_from=R40
The friend who gave me the telly is still looking for his!
Comment
-
Originally posted by Swainy;2017413
So I want to return it to the default settings but I can't find anything on the net so I was wondering if someone could go into the service mode on their TV and let me know what the settings are.
To enter the service mode, put the TV into stand by mode by pressing the green button on the remote. Pressing the [i+button (last on the number pad), pressing the 5 button, the + button for volume, and then the teletext button. Then it will show the "TT", and once that happens pressing the menu button should bring up the menu.
Cheers
Here's my remote - if you can point out which buttons I need to press etc, I can give it another go.
Comment
-
Ignore any misspellings as the screen is quite flickery in that mode for me and was hard to determine what all the words were. The numbers were easier to read!
First:
16:9 Off
System UK
Text West
AGL 55
PLL 45
Then selecting adjustments:
Red HWB 29
B&W Delay 00
Ver Size 22
Ver Breadth 00
Pin Ampl 00
Par Tilt 32
V Linear 32
Corn Corr 00
Vcen Ew 22
V Pos 50
H Centre 39
Blue HwB 19
Green HWB 19
Then it loops back round to the start!
Comment
-
I've been fiddling with my one now I have a remote. One PITA is that you can't alter the values unless you have a PAL device connected and the centring is different for NTSC/PAL meaning lots of flicking back and forth to get it right for my HK N64!
I notice that there's a whole heap of overscan (more image than visible). If I wanted to maximise the visible image, which controls should I alter, and how would I go about keeping the geometry correct?
I used a test card from the net and that suggests that the geometry is only slightly out presently (squares different sizes at different points by a few millimetres).
Comment
-
Originally posted by sincil View PostIgnore any misspellings as the screen is quite flickery in that mode for me and was hard to determine what all the words were. The numbers were easier to read!
First:
16:9 Off
System UK
Text West
AGL 55
PLL 45
Then selecting adjustments:
Red HWB 29
B&W Delay 00
Ver Size 22
Ver Breadth 00
Pin Ampl 00
Par Tilt 32
V Linear 32
Corn Corr 00
Vcen Ew 22
V Pos 50
H Centre 39
Blue HwB 19
Green HWB 19
Then it loops back round to the start!
Comment
-
Hey! Ok I hope someone sees this post even though it's a month after the most recent one.
I just purchased the TV in question from eBay so that I can hook up my N64 again. I only have the default connection that the 64 came with (I don't know the technical term for it, but it's basically an aerial wire).
I was wondering if anyone could help me out with how to get it working? I'm not sure that I am tuning the channels properly, so if anyone has any advice on that, or more specifically, if anyone has a 64 hooked up to one of these TVs any help would be very much appreciated!
Thanks
Comment
Comment