Announcement

Collapse
No announcement yet.

PPPoE authentication in final pilot to providers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PPPoE authentication in final pilot to providers

    PPPoE authentication in final pilot to providers

    BT Wholesale has slowly been upgrading the various types of BT Central (pipes used to connect an ISP to the BT Wholesale network) to support PPPoE authentication. The last stage involves the the rollout of an auto-sensing mechanism for PPPoE on the original implementations of 2, 10, 34 and 155Mbps BT Central connections.

    PPPoE is an alternate method of authenticating yourself with the service provider, and the vast majority of ADSL kit sold in the UK will support it now. Though there generally is no benefit in switching from PPPoA to PPPoE. Where it will make a difference is that the Windows XP Broadband connection wizard uses PPPoE, which could allow providers to drop the old dial-up style interface. The other benefit is people who want to use a Cable/DSL router, until now if you had a single IP address ADSL account there was a limited choice of hardware, with PPPoE the choice widens in terms of what you can use for the modem - with PPPoE it will be possible to use any modem that supports PPPoE bridging.

    It should be highlighted that the use of PPPoE does not mean you will be getting an Ethernet presentation at the wall socket. The line will still be a G.DMT ADSL line, therefore cable/DSL routers WILL still require an ADSL modem.

    Where people are using an ISP that is taking part in the pilot they may find that modems that auto detect the line type may detect PPPoE now, rather than just PPPoA. Until such time as ISPs announce full PPPoE support it is advisable to stick with the PPPoA set-up.
    finally even though you can already do it with a router.

    #2
    won't make any difference to most people

    Comment


      #3
      i thought it speeded up the connection cause its thru ethernet ?

      Comment


        #4
        It's not ethernet, it says you still need the standard connector (rj11, rj22? forget which). Hence the requirement, still, for an adsl "modem".

        Don't see much point tbh.

        Comment

        Working...
        X