Supergun wiring question

[Geezer]

I've ordered almost all the parts I need, I just need to make an order from Swallow Amusement Machines for some wires, fuses and a couple of other bits.

With regards to connecting wires I was told that I should use 16 or 18 guage for power and 22 guage is fine for the rest of the wiring. The problem I have is that I don't understand very much about the guage system.

Here's a link to the section in question:

http://www.coin.demon.co.uk/-misc.htm#e

Which wires are suitable? The only wire they've put the "guage" next to is the Kynar
There are other measurements e.g.16x0.2mm, but I'm not 100% on what they mean

[trev1976]

try these mate

https://www.sgrepository.com

https://www.neo-geo.com

https://www.gamesx.com

[charlaph]

http://www.foelock.co.uk/foelock/conversions/swgawg.htm

If you search on somewhere like Maplin, most cables will have their AWG or SWG (or both) quoted - just choose the one that's suitable.

If you see something like 14-2 or 16-3, the number after the dash will refer to the number of conductors in the cable, so -2 means 2 wires and -3 means 3 etc...