Super Famicom shells

[Shimmyhill]

As my usa snes died (R.I.P.) i bought a Super Famicom to replace it. I also got a Bridge adaptor to play my USA games.

However the Bridge is a little flaky, like most old cart stuff needs a wiggle to work

Plan was to cut shell to fit carts but id rather buy another shell to cut. Anyone know anywhere i could buy one ???

[MonkeyJuggleDX]

pick up a PAL snes cheap and mod the top of that. then just switch it with the jap one.

[Shimmyhill]

i had that thought, can i replace just the grey middle bit ????

dont want to offend the sfc with 'super nintendo' written on the lid

[mmmonkey]

Yes, the top of the case is made up of quite a few parts, once you open it up, and look inside of the top half, it's easy to see how to pop it all off.

Have you got the required screwdriver to take it apart though?

Pete

[Shimmyhill]

Cheers for the reply.

I do have the Gamebit, mind that little scamp 007 has it @ the mo

[Papercut]

you could have a go at swapping the case from your dead US SNES (power connector might not fit though).

[gIzzE]

you can put a s famicom board in you snes case put you may have to shave a little off where the power/av section is as the jap machine is slightly wider there.