Universal Cube RGB lead

[mmmonkey]

Just a quick technical question. I've read the guide on how to build a NTSC cube RGB lead. Does anybody know if it's possible to connect up the RGB signal from the analog lead aswell - so the lead will be compatible with both NTSC and PAL cubes?

Anybody tried this?

Ta
Pete

[Mayhem]

Erm... maybe the guides you read are missing this info, but you can use the NTSC RGB cable perfectly fine on a PAL Cube too... there's no need to as you can buy a cheaper official cable to do the same job, but it's good if you want to take your NTSC Cube to use on other TVs.

[mmmonkey]

I was reading the guide http://www.rgbcube.co.uk and just wanted to confirm that it's okay to leave the RGB wires from the analog cable connected aswell as the RGB wires from the digital lead.

Why... because I want to be able to use the one cable for both my PAL and NTSC cube.

Cheers
Pete

[Yod@]

You can still use the same lead - the hacked lead will still output the same RGB picture when used on a PAL GC. I'm using the same lead on both my cubes.

[mmmonkey]

excellent, cheers guys.

pete