I am trying to do the 50/60Hz switch, but the guides on the internet refer to saturn models different from mine, and I cant find the +5V or the ground pin. Can anyone help?
Announcement
Collapse
No announcement yet.
saturn PAL VA0 power supply pins (and how to use import adaptor)
Collapse
X
-
should be easy to find if you have a volt meter, iirc (modded mine a while ago) there is a separate power supply board, connected to the main board by ~4 large pins just like in a dreamcast, one of these should be +5V and another ground. The ground will be connected to loads of stuff, like the metal case thing so should be easy to spot by following the tracks? then use the volt meter to find the +5V. obviously solder to the back of the main board not the power supply board or the pins. hopefully someone will have a better answer for you as i don't want to be held responsible for anything that might go wrong. Hope that helpsand hope i am not talking complete rubbish
on second thaughts the power supply isn't connected to the ground via the plug, although what i said should still be right? good luck!
-
i messed up the first one i did too, pulled one of the solder pads off had to solder directly to the chip on the wrong side and messed up 2 legs of the chip, it still works but crashes quite a bit, did my mate's one next and that went fine, but i wouldn't do it for anyone else, would be far too scared of messing it upgood luck getting it fixed
Comment
-
yeah, it wasnt easy though, at first the joypads didnt work and the CD wasnt being read, so I sort of opened it up and closed it again, and then it started to work (??????). I have seen this sort of cart on ebay, being sold as an action replay/import adaptor, so I was a bit concerned as to why it wasnt working. Dont suppose theres any chance that druring the modding process that the cartridge slot has been messed up?I dont think so, most probably it is a memory upgrade as you say, or the cartridge itself may have stopped working.
Comment
-
Dont suppose theres any chance that druring the modding process that the cartridge slot has been messed up?
Comment
-
The cart is totally white with no label, with no other ports on it. Just tried it again and it worked, it seems there was a "rayman" game save on it, so it must have been some sort of memory card or something. Exactly how would an action replay/import adaptor work anyway?Will there be something on screen when I boot the saturn up?
Comment
Comment