I have the US version of Ninjawarriors, but cannot seem to get the game to work. I have cleaned the contacts with an eraser and cleaning alcohol, but its still does not work, just shows i jumbled up screen or completely black screen on start up. Any other suggestions??
Announcement
Collapse
No announcement yet.
Help me fix this Snes Game
Collapse
X
-
I had a Sonic cart that was jam-encrusted that needed a good scraping with the flat edge of a small screwdriver before it worked. Try that if you're desperate and there's a lot of crap on the connectors, but don't scrape too deeply.
By the way, does the screen just stay completely flat, or do you get a sync signal?
Have you opened up the cart to check that you haven't been done?
Comment
-
Originally posted by vertigoI had a Sonic cart that was jam-encrusted that needed a good scraping with the flat edge of a small screwdriver before it worked. Try that if you're desperate and there's a lot of crap on the connectors, but don't scrape too deeply.
By the way, does the screen just stay completely flat, or do you get a sync signal?
Have you opened up the cart to check that you haven't been done?
Comment
-
Heh nice work
I have an Alex Kidd in Something World cart for Megadrive that still refuses to work, even though the chip's all present and correct. It's really clean too, so I haven't got a clue why it won't boot.
Mostly I think you just need to give them a damn good clean, although this isn't working with my MD cart either.
Perhaps one of the few resistors on the board is dead on these cartridges that no longer work. If you own a multimeter, check to see if the resistor is functioning properly. I should do that to my one.
Comment
Comment