An arcade stick thread

[Jimmyboi]

I just looked at my EX2 and the black circle bit that goes around the stick is completely loose, so that if I turn the stick upside down it actually falls all the way to the ball of the stick. Does anyone know if that's normal? Common sense tells me no but then again it is a budget stick.

[Adrock]

That is perfectly normal. It needs to move when you move the stick around to cover the hole where the stick comes through.

Every stick I've ever used has one and they are always loose.

[JutmanCustoms]

Hey Guys,

Please see below my latest custom with artwork based on the movie Vertigo as per customer request. Instead of my usual light maple hardwood I went for a nice dark cherry oak which I believe complements the orange very well as do the all black Seimitsu PS-14-GN's. Originally the customer wanted clear orange PS-14-KN's but we both felt the solid black was the way to go (increased the lead time by 3 weeks as they were special order)but I feel they were worth it. Stick is Seimitsu LS-32 and navi buttons are Sanwa OBSF-24's. Naturally the stick is duel modded with the help of the infamous Paewang Rev. and as is the norm with my latest builds the stick weighs in at 7kg. Hope you like, would be great to hear feedback. Oh and as always big shout to Andy at Gremlin Solutions for his flawless service on all components

- J

[CrispyXUK]

That's lovely.

[Adrock]

Hmmm, I may modify my dreamcast stick with a paewang pcb. It already has sanwa stick and buttons. Excellent pcbs, allowing PS3 and 360 in one stick is a nice option to have. The stick I linked a while back from play.com use the paewang pcbs. I put sanwa bits in the one I bought too. Very nice stick now, just need to get round to getting custom artwork.

Jutman, do you do all of the wood work yourself? Also, is your artwork printed on paper behind plastic or printed onto some kind of laminate/plastic?

[Skull Commander]

Another quality stick

[JutmanCustoms]

That's lovely.

Thank you!

Hmmm, I may modify my dreamcast stick with a paewang pcb. It already has sanwa stick and buttons. Excellent pcbs, allowing PS3 and 360 in one stick is a nice option to have. The stick I linked a while back from play.com use the paewang pcbs. I put sanwa bits in the one I bought too. Very nice stick now, just need to get round to getting custom artwork.

Jutman, do you do all of the wood work yourself? Also, is your artwork printed on paper behind plastic or printed onto some kind of laminate/plastic?

Hi there!
If you duel mod your DC stick I will buy your DC PCB
I design the woodwork and a close friend of mine is a joiner so he works to my plans.
The artwork is printed on thick gloss paper and covered with 3mm thk plexi glass.

Another quality stick

Thank you!

[Atticus]

Nice stick there

[JutmanCustoms]

Nice stick there

Thanks!

Please see below another custom. Artwork as per customers request is based on the fantastic Shmup Gunbird. Buttons are Seimitsu PS-14-KN's. Stick is Seimitsu LS-32. Navi buttons are Sanwa OBSF-24's. Duel Modded with the Paewang PCB. My usual Hard maple case design with Steel inserts and weighing in at 7kg! Screwless design. Hope you likey

Thanks

J

[browngirl]

great work there ! do you make these for yourself? or do you sell them, as id be interested in 1 would kill to have a 1 stick solution for 360 and ps3

[JutmanCustoms]

great work there ! do you make these for yourself? or do you sell them, as id be interested in 1 would kill to have a 1 stick solution for 360 and ps3

Thank you! and yes I make to order, all sticks I have posted are custom orders, you can see more of my work here - http://www.joystickvault.com/showgal...r=3272&cat=500

and I can be found on SRK.

If interested, send me a PM many thanks

Justin

[Neil]

Is it difficult/expensive to dual mod a 360 TE stick allowing it to work with the PS3?
Or would it just be cheaper to buy another stick?

[speedlolita]

Is it difficult/expensive to dual mod a 360 TE stick allowing it to work with the PS3?
Or would it just be cheaper to buy another stick?

Just buy an MC Cthulhu and you could get it working for Wii and PS1/PS2 with ease.

As well as PS3 / 360 ofc.

[J0e Musashi]

Isn't there any kind of 360>PS3 USB adapter?

[speedlolita]

Not that I know of no.